PN-86HC1/75HC1/70HC1E brochure
Dimensions
(PN-86HC1)
(PN-70HC1E)
Screw holes for
mounting brackets*
350
(13
3
/
4
)
202.5
(8)
197.5
(7
3
/
4
)
350
(13
3
/
4
)
94
(3
11
/
16
)
113
(4
7
/
16
)1,988 (78
1
/
4
)
806 (31
3
/
4
)
1,897* (74
11
/
16
)
1,175 (46
1
/
4
)
1,228 (48
3
/
8
)
1,068* (42
1
/
16
)
(PN-75HC1)
Screw holes for
mounting brackets*
300
(11
13
/
16
)
210
(8
1
/
4
)
190
(7
1
/
2
)
300
(11
13
/
16
)
93
(3
11
/
16
)
105
(4
1
/
8
)1,735 (68
5
/
16
)
806 (31
3
/
4
)
1,652* (65
1
/
16
)
1,036 (40
13
/
16
)
1,089 (42
7
/
8
)
930* (36
5
/
8
)
Screw holes for
mounting brackets*
300
(11
13
/
16
)
101.5
(4)
298.5
(11
3
/
4
)
300
(11
13
/
16
)
93
(3
11
/
16
)
100
(3
15
/
16
)1,629 (64
1
/
8
)
806 (31
3
/
4
)
1,541* (60
11
/
16
)
990 (39)
1,044 (41
1
/
8
)
870* (34
1
/
4
)
www.sharp.co.uk
Specifications
Model name PN-86HC1 PN-75HC1 PN-70HC1E
Installation Landscape
LCD panel
86-inch 75-inch 70-inch
Max. Resolution 3840 x 2160 pixels
Max. Display Colours (approx.) 1.07 billion colours
Pixel Pitch (HxV) 0.4935 -0.4935 mm 0.4296 -0.4296 mm 0.40075 - 0.40075 mm
Max Brightness*
400cd/m
2
350cd/m
2
Contrast ratio 1200 : 1 4000 : 1
Viewing Angle (H/V)*
178°/178° (CR
>_
10) 176°/176° (CR
>_
10)
Active Screen Area (W×H) 1895 x 1066 mm 1649.7 x 927.9mm 1539 x 866 mm
Response Time 8 ms (grey to grey, avg.)
Backlight LED, direct lit.
Touchscreen
Touch Technology IR (infrared blocking detection method)
Multi-Touch 20-Points 10-Points
PC Connection Port USB 2.0
Protection Glass Thickness: Approx. 4.0 mm Shock resistance: 130 cm*
3
Touch Pen Passive Pen Included.
Computer
Input
Video Analogue RGB (0.7 Vp-p) [75Ω], HDMI
Synchronisation Horizontal/vertical separation (TTL: positive/negative)
Plug & Play VESA DDC2B
Video Colour System NTSC (3.58 MHz)/NTSC (4.43 MHz)/PAL/PAL60 /SECAM
Input
Terminals*
Front HDMI (HDCP2.2 compatible, HDR10 supported) × 1
Rear
PC analogue: Mini D-sub 15-pin × 1, HDMI (HDCP2.2 compatible,
HDR10 supported) × 2, 3.5 mm-diameter mini stereo jack × 1, AV mini jack × 1,
Component mini jack × 1, RS-232C × 1
PC analogue: Mini D-sub 15-pin × 2,
HDMI (HDCP2.2 compatible, HDR10
supported) × 2, 3.5 mm-diameter mini
stereo jack × 2, AV RCA × 1*
5
, Component
RCA × 1*
5
, Audio RCA × 1, RS-232C × 1
Output Terminals*
3.5 mm-diameter mini stereo jack × 1, SPDIF × 1
PC analogue: Mini D-sub 15-pin × 1,
3.5 mm-diameter mini stereo jack × 1, SPDIF × 1
Expansion Slot (Full-sized OPS) 19 V, 4.74 A (power supplied when expanding the functions with an optional part)
Speaker Output 10 W + 10 W
Mounting 4 points, 700 x 400 mm pitch, M8 screw 4 points, 600 x 400 mm pitch, M8 screw 4 4 points, 600 x 400 mm pitch, M6 screw
Power Supply*
100V – 240V AC, 50/60 Hz
Power Consumption*
530 W 460 W 400 W
Environmental
Conditions
Operating
Temperature*
5˚C to 35˚C
Operating Humidity*
20% to 80% (no condensation)
Dimensions (W x D x H) (display only) 1988 × 113 × 1175 mm 1735 × 105 × 1036 mm 1629 x 99 x 990 mm
Weight 80 kg 61 kg 54 kg
Main Accessories
AC power cord, remote control unit, remote control unit battery (AAA size) x 2, set-up manual, blank sticker, cable clamp x 3, USB cable, pen tray,
SHARP Pen soware (CD-ROM), passive pen x 2, wireless adapter
*
Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the
lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely
constant level of brightness. *
Excluding the touch sensor part around the LCD panel. *
Approximate distance at
which the glass panel can withstand the impact of a 500-gram iron ball dropped on its centre. *
Use a commercially
available connection cable for PC and other video connections. *
Composite video and component cannot be used
simultaneously. *
The AC power cord is an inlet type. The cable is bundled (3 pins). *
When an option is installed
on the expansion slot. When not installed: PN-86HC1: 420 W, PN-75HC1: 360 W, PN-70HC1E: 295 W *
Temperature
conditions may change when using the monitor together with the optional equipment. In such cases, please check
the temperature conditions specified by the optional equipment. *
Check the requirements of the computer and
other devices to be connected, and make sure that all requirements are satisfied.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. All other brand names and product names may be trademarks
or registered trademarks of their respective owners. Design and specifications are subject to change without prior
notice. PN-86HC1/75HC1/70HC1 August 2019. Job No.19606. All trademarks acknowledged E&OE.
®