Operation Manual

54 Camera
Recording Close-up Video Clips
1. In video camera mode, set the macro switch to the
macro position ( ).
2. Press or the side-down key to start recording the
video clip.
To cancel macro mode, set the macro switch to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered approximately up to 6.5
times in 10 steps. Press c or d to change the zooming
ratio.
Zooming ratio indicators
.... : Indicates the magnification.
Selecting Video Quality
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press a or b to highlight “Video Quality”, then
press or
A
[Select] to select.
3. Press a or b to highlight “Normal” or “Fine”,
then press to select.
Video quality indicators
:Fine
:Normal
Selecting the Recording Size Mode
You can select the recording size mode.
1. In video camera mode, press
A
[Options].
The Options menu is displayed.
2. Press a or b to highlight the “Record Size”, then
press or
A
[Select] to select.
3. Press a or b to highlight “Extended Video” or
“For Message Sending”, then press to select.
Note
• If “For Message Sending” is selected, the size of the
video clip that can be recorded depends on the
message size set in MMS settings (p. 62).
• “Save and Send” is not displayed after recording in
extended video mode.
In the Case of No Available Memory
When the number of video clips that can be recorded
becomes 3 or less, the remaining sets indicator in the
upper left of the screen turns red. (The number of sets
that can be recorded is approximate.)
Even if the number of video clips that can be recorded
becomes 0, you can continue to record and save video
clips until the message, “Memory full. Please delete
some data!” appears. After which, you can choose the
memory for saving the video clip.