Operation Manual

46 Camera
5. Press A [Save].
If you have selected “Choose before Saving” when
saving, the memory card is not inserted, or memory
has run out, press a or b to highlight “Save to
Handset” or “Save to Card”, then press .
“Saving (file name) to My Stuff…” is displayed,
then the picture is registered.
6. Press F to return to standby.
Remaining shots indicators
123: Indicates the remaining number of pictures
that can be taken.
***: Indicates the remaining number of pictures
that can be taken exceeds 999.
???:
Indicates a memory card is not inserted or
cannot be recognized by the phone. (When
“To Memory Card” is selected for the “Save
New Pictures” option)
---: Indicates setting of “Save New Pictures” is
“Choose before Saving”.
Tip
• Pressing E during standby also activates digital
camera mode.
• If you wish to send a picture by multimedia message
after taking the picture, press before step 5.
Large MMS messages may cause the size of attached
pictures to be reduced.
• To leave digital camera mode without registering the
taken picture after step 4, press F and then press
A
[Yes].
• When the distance to the subject is approximately 10
cm, set the macro switch to the macro position ( ).
When the distance to the subject is approximately 40
cm or more, set the macro switch to the normal
position ( ).