Operation Manual

40 Contacts List
6. Press a or b to highlight “On” or “Off”, then
press to select.
7. Press a or b to highlight “Assign Ringtone”, then
press to select.
8. Press a or b to highlight “Preset Sounds” or “My
Sounds”, then press to select.
9. Select the desired ringtone.
For details on selecting a ringtone, see “Assigning
Ringtone” on page 119
10. Press a or b to highlight “Vibration”, then press
to select.
11. Press a or b to highlight “On”, “Off” or “On &
Link to Sound”, then press to select.
For details on selecting a vibration, see “Vibration”
on page 119.
12. Press a or b to highlight “Light Colour”, then
press to select.
13. Press a or b to highlight the desired colour, then
press to select.
For details on setting the light colour, see “Light
Colour” on page 120.
14. Press A [OK].
Note
• This menu is available when the Contacts location is
set to “Handset Memory”.
Assigning a Ringtone to Each
Contacts List Entry
A specified ringtone or vibration setting can be
assigned to a pre-registered entry.
1. Perform steps 1 to 3 in “Displaying the Contacts
List” on page 34.
2. Press a or b to highlight the desired entry.
3. Press A [Options] to display the Options menu.
4. Press a or b to highlight “Edit”, then press or
A [Select] to select.
5. Press A [Options] to display the Options menu.
6. Press a or b to highlight “Ringtone”, then press
or A [Select] to select.
7. Press a or b to highlight “On” or “Off”, then
press to select.