Operation Manual

22 Call Functions
Redialling
You can redial numbers in the call log. Select from
specific categories or “All Calls”. Specific category
contains up to 10 numbers and the “All Calls” list
contains up to 30.
1. Press D during standby.
2. Press c or d to switch logs between “All Calls”,
“Dialled Numbers”, “Missed Calls” and “Received
Calls”.
3. Press a or b to highlight the number you wish to
call.
4. Press D to redial the call.
Automatic Redialling
This setting allows you to automatically redial the
number if the first attempt was unsuccessful because
the called party was busy.
If you wish to stop redialling, press F or C [End].
To Set the Auto Redial Function
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Settings”, then
press to select.
3. Press a or b to highlight “Call Settings”, then
press to select.
4. Press a or b to highlight “Auto Redial”, then
press to select.
5. Press a or b to highlight “On” to enable the Auto
Redial function or “Off” to disable it, then press .
Note
• When you receive an incoming call, the Auto Redial
function is interrupted.
• Automatic redialling is not available for fax and data
calls.
Ending a Call
1. Press F to end the call.
Tip
• When the handsfree kit is connected to the phone, you
can end calls by pressing the Answer button.