Operation Manual

144 Settings
Diverts
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
Diverting Calls
1. Press to display the Main menu.
2. Press a, b, c or d to highlight “Settings”, then
press to select.
3. Press a or b to highlight “Diverts”, then press
to select.
4. Press a or b to highlight one of the divert options,
then press to select.
The divert options available are:
• “All Calls”: Diverts all voice calls without
ringing.
• “When Busy”: Diverts incoming calls when you
are on a call.
• “No Answer”: Diverts incoming calls if you do
not answer a call within a certain
period of time.
• “Not Reachable”: Diverts incoming calls when your
phone is out of network service or
switched off.
5. Press a or b to highlight “On”, then press to
select.
6. Enter the phone number you wish to divert calls,
then press .
If you wish to divert calls to a number which is
located in the Contacts List, search for the desired
Contacts List entry.
Press a or b to display the Contacts List. Then
press a or b to highlight the desired entry, then
press to select. For details on searching the
Contacts List entries, see “Finding a Name and
Number” on page 37.
If you select “No Answer” in step 4:
7. Press a or b to highlight the period of time from
6 levels (05 to 30 seconds), then press to select.
Note
• When a divert is set to “All Calls”, “ ” is displayed
on the standby screen.
Tip
• If you select “By Service” in step 5, you can select
further divert options in the selected option in step 4.
(M 9-3)