Operation Manual

Profiles 121
Warning Tone
This function enables your phone to emit the warning
tone when an error occurs.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 117.
2. Press a or b to highlight “Warning Tone”, then
press to select.
3. Press a or b to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press a or b to highlight “Volume”, then press
to select.
5. Press a to increase the volume or press b to
decrease the volume, then press .
6. Press a or b to highlight “Tone”, then press
to select.
7. Press a or b to highlight “Preset Sounds” or “My
Sounds”, then press to select.
8. Select the warning tone.
For details on selecting a ringtone, see “Assigning
Ringtone” on page 119.
9. Press a or b to highlight “Duration”, then press
to select.
10. Press a or b to highlight the desired duration,
then press to select.
Power On/Off Sound
The phone can be set up to emit a sound when it is
switched on or off. You can define the volume, duration
and the melody to be used for this task.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 117.
2. Press a or b to highlight “Power On Sound” or
“Power Off Sound”, then press to select.
3. Press a or b to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press a or b to highlight “Volume”, then press
to select.
5. Press a to increase the volume or press b to
decrease the volume and then press .
6. Press a or b to highlight “Sound”, then press
to select.
7. Press a or b to highlight “Preset Sounds” or “My
Sounds”, then press to select.