User guide
48 Camera
To Switch the Viewfinder
You can switch the viewfinder from the main display to
the external display for taking a self-portrait.
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
When you use the external display as the viewfinder,
the taken pictures are saved automatically.
Taking Close-up Pictures
1. In digital camera mode, set the macro dial to the
macro position ( ).
2. Press or the side-down key to take the picture.
To cancel macro mode, set the macro dial to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered between “×1”, “×2”, and
“×4”. Press or to change the zooming ratio.
Note
• When “Picture Size” is set to “Small”, you can use
the zoom function in three magnifications (×1, ×2,
×4).
• When “Picture Size” is set to “Medium”, you can use
the zoom function in two magnifications (×1, ×2).
• When “Picture Size” is set to “Large”, you cannot
use the zoom function.
Selecting the Picture Size
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Picture Size”, then
press or A [Select] to select.
3. Press or to highlight the picture size, then
press to select.
Selecting the Picture Quality
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Picture Quality”, then
press or A [Select] to select.
3. Press or to highlight “Normal” or “Fine”,
then press to select.