User guide

94 My Stuff
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to edit, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Set Tone” or “Set
Strength”, then press or A [Select] to select.
For full details, see pages 109 to 111.
Note
• If “Set Tone” and “Set Strength” are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to send, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Send Message”, then
press or
A
[Select] to select.
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
4. Press or to highlight the file format
“SMAF”, “MIDI” or “i Melody”, then press to
select.
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data is converted if you
select “i Melody” in step 4.
Deleting Sounds
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press or to highlight “One Sound” or “All
Sounds”, then press to select.
5. press A [Yes].
To cancel deletion, press C [No] in step 5.