User guide

Call Manager 80
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1.
Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 79.
2.
Press or to select “Cost Units”, then press
.
3.
Press or to select “Set Units”, then press
.
4.
Enter your PIN2 code, then press .
5.
Enter a cost per unit, then press .
To enter a decimal point, press .
6.
Enter a currency unit (up to 3 characters), then press
.
Checking the Charge Rate
1.
Select “Read Units”, then press at step 3 in
“Setting the Charge Rate”.
The charge rate is now displayed.
2.
When you have finished, press [Back].
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1.
Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 79.
2.
Press or to select “Max Cost”, then press
.
3.
Press or to select “Set Limit”, then press
.
4.
Enter your PIN2 code, then press .
5.
Enter a value, then press .
To enter a decimal point, press .
Checking the Charge Limit
1.
Select “Read Limit”, then press at step 3 in
“Setting the Charge Limit”.
The value of the charge limit is now displayed.
2.
When you have finished, press [Back].