Operation Manual

Messages 108
To Save a Message in the Drafts Box
You can save a message in the Drafts box temporarily
and send it later, without sending it immediately.
1. Perform steps 1 to 5 in “Creating a New MMS” on
page 106.
2. Press or to select “Save”, then press to
save the message in the Drafts box.
Note
• You can send it later following the instructions in
“Sending a Message in the Drafts Box”.
Turning the Slide Show Setting On or Off
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 106.
2. Press [Options] to display the Options Menu.
3. Press or to select “Slide Show”, then press
.
4. Press or to select “On” or “Off”, then press
.
If You Select “On”
• You can create messages which have up to 3 slides.
Each slide can contain one picture/image, one sound
file and up to 512 characters of text (up to the
message total 30kb limit).
• The slide options available are:
Add Slide: To add a new slide.
Delete Slide: To delete the active slide.
Previous Slide: To navigate to the previous slide.
Next Slide: To navigate to the next slide.
• EVA data cannot be attached as a slide data to a
message.
If You Select “Off”
• You can attach a maximum of 6 pictures/images or
sounds in all.
• EVA data cannot be attached as a slide data to a
message.
Inserting Attached Data
You can send pictures/images and sounds saved in the
Saved Pictures or Saved Sounds attached to MMS.
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 106.
2. Press [Options] to display the Options Menu.
3. Press or to select “Picture” or “Sound”, then
press .
4. Select the file name you wish to attach by pressing
or , then press .
The selected picture/sound is attached.
5. Press .