User Guide

Call Manager 74
Data Counter (M 6-2-7)
You can confirm the amount of bytes which you used
in the GPRS transmission.
1.
Press to display the Main Menu.
2.
Press or to select “Call Manager”, then press
.
3.
Press or to select “Call Register”, then press
.
4.
Press or to select “Data Counter”, then press
.
5.
Press or to select “Last Data” or “All Data”,
then press .
You can now check the amount of bytes.
6.
When you have finished, press [Back].
Resetting All Data Counter
1.
Perform steps 1 to 4 in “Data Counter”.
2.
Press or to select “Clear Counter”, then press
.
3.
Press or to select “Yes”, then press .
The Data Counter is reset to zero. To cancel
resetting,
select “No” at step 3, then press .
Diverts (M 6-3)
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
Divert Calls
1.
Press to display the Main Menu.
2.
Press or to select “Call Manager”,
then press .
3.
Press or to select “Diverts”, then press
.
4.
Select one of the divert options by pressing or
, then press .
The divert options available are:
• “All Calls”: Diverts all voice calls without
ringing.
• “When Busy”:
Diverts incoming calls when you are
on a call.
• “No Answer” : Diverts incoming calls if you do
not answer a call within a certain
period of time.
• “Not Reachable”: Diverts incoming calls when
your phone is out of network
service or switched off.
5.
Select “On”, then press .