User Guide

53 Fun & Games
Setting an Algorithm
Set the combination of the operator.
Select from 4 types of combinations in 8 chords, and 2
types in 16 chords.
(Green number): The modulator (modulating part)
(White number): The carrier (modulated part)
Setting the Operator
The meaning and content of the parameter that can be
set to the operator is described below.
8 Chords
16 Chords
Algorithm3
Algorithm4
Algorithm5
Algorithm6
Algorithm1
Algorithm2
Parameter Meaning
Multiple
(13 levels)
When the value of the carrier is large, the
sound becomes high. You can set various
types of notes by changing the values of the
modulator.
Envelope
(Continu-
ous/Decay)
This sets continuous same note or fade-out.
Sustain
(On/Off)
This sets a note to be sustained after com-
pleting the note. If you want to have a note
with reverberation, set this function on.
Key Scale
Rate
(2 levels)
Set the function to “2” if you want to a short
note.
Key Scale
Level
(4 levels)
This function sets the rate of reducing the
volume as a note becomes higher.
Total Level
(64 levels)
In the carrier, the volume becomes large as
this level becomes higher.
In the modulator, the melody becomes
brighter as this level becomes higher. The
melody becomes softer as this level
becomes smaller.
Attack Rate
(15 levels)
This sets the time from the beginning of the
sound to the maximum volume.