User guide

Camera 47
Selecting Video Quality
“Camera”
→ “Video Camera” → [Options] →
“Video Quality”
1. Select “Normal” or “Fine”.
Video quality indicators
: Normal
:Fine
Selecting the Anti-flicker
“Camera”
→ “Video Camera” → [Options] →
“Anti-flicker”
1. Select “Mode1” or “Mode2”.
Note
• Vertical stripes may occur on the video clip due to the
light source. Change the mode to rectify.
• The video camera uses a C-MOS sensor. Although
this camera has been manufactured to the highest
specifications, some video clips may still appear too
bright or too dark.
• If the phone has been left in a hot place for a long
time before recording a video clip, the video quality
may be poor.
In the Case of No Available Memory
When the number of video clips that can be recorded
becomes 3 or less, the remaining sets indicator in the
upper left of the screen turns red. (The number of sets
that can be recorded is approximate.)
Even if the number of video clips that can be recorded
becomes 0, you can continue to record and save video
clips until the message, “Memory full. Please delete
some data!” appears. After that, no video clips can be
saved. Try to delete or move the data to make some
space.
Adjusting the Brightness of the Video Clips
According to Light Conditions
Press a or b to adjust the brightness of the video clip.
Picture brightness (exposure level) indicators
: (Bright → Normal
→ Dark)
Once the phone has returned to the stand-by screen, the
brightness settings return to default.