Specifications

04/1/28 CX-GD5200V_EN2.fm
E-31
ENGLISH
GX-CD5200V
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) (continued)
■ Tape 1 playback (one side)
■ Continuous playback (TAPE 2 to TAPE 1)
To stop playback:
Press the button.
To cancel continuous playback:
Press the CONTINUOUS PLAYBACK button again and " "
indicator will disappear.
Note:
This function cannot be operated from TAPE 2.
■ Tape 2 playback (two sides)
To change the side of tape:
Press the or button during playback.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TAPE (1 2) button to select TAPE 1.
3 Open the cassette compartment by pushing the area
marked " ".
4 Load a cassette into the TAPE 1 cassette compartment
with the side to be played facing towards you.
5 Press the button to start
playback.
Tape play indicator
1 Press the area marked " " and load cassettes into the
TAPE 1 and TAPE 2 cassette compartments.
2 Press the TAPE (1 2) button to select TAPE 1.
3 Press the CONTINUOUS PLAYBACK button.
4 Press the TAPE 1 button to start playback.
● Playback begins from side A on TAPE 1, the playback se-
quence will be as follows:
TAPE 1 side A → TAPE 2 side A → TAPE 2 side B → stop
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TAPE (1 2) button to select TAPE 2.
3 Open the cassette compartment by pushing the area
marked " ".
4 Load a cassette into the TAPE 2 cassette compartment with
side A facing you.
5 Press the button on the remote control to choose one
side or both sides.
… To listen to both sides.
To play both sides ( ), start from side A. When play-
back starts from side B, side A will not be played.
…For endless repeat play of both sides.
…To listen to one side.
6 Press the button to listen to side A, or the button for
side B.
Reverse playForward play
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals