Specifications

04/1/28 GX-CD5200V_EN1.fm

E-16

ENGLISH

GX-CD5200V

Disc Playback

Preparation for video CD playback

■ Adjusting the TV and VCR

The TV and VCR input varies according to the connection method.

Be sure to make the settings correctly. (Then, follow the playback

procedure on page 17 to check the settings.)

■ Selecting the video output format

Video CD is recorded in PAL or NTSC format.

Select the video output format (NTSC or PAL) according to your TV

or VCR.

To select the video output format:

Whilst in the stop mode, press the PAL/NTSC button.

Each time this button is pressed, the format will change in the fol-

lowing order:

Notes:

● When you watch a PAL disc in the NTSC mode or an NTSC disc

in the PAL mode, the vertical size of the picture will not be

modified.

● If a multi-mode TV is equipped with an input selector switch, set

the switch to "MULTI MODE". For the details, refer to the TV

operation manual.

● Do not change the video output format during playback. If you do,

the picture signal may not be output properly.

● Picture may be distorted when the setting is switched. This is not

the malfunction of the unit.

● The selected NTSC or PAL mode is retained even when you turn

on/off the unit or switch functions. The mode returns to the default

if the AC power lead is left disconnected. Select a mode again.

● Whilst playing an audio CD or MP3 disc, you cannot switch to

NTSC or PAL.

VCR

Set the input selector

to Game/Video.

Set the TV/VCR selector

to VCR.

Set the input selector

to VCR.

<For TV sets without a video in

ut socket>

NTSC PAL

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Sharp Manuals