User Manual

E-10
(Continued)
■ Dubbing from tape to tape
1 Set the FUNCTION switch to TAPE.
2 Load a prerecorded cassette into the TAPE 2 cassette com-
partment. Insert a blank tape into the TAPE 1 cassette com-
partment.
3 Set the DUBBING SPEED switch to NORMAL for normal-
speed dubbing, HIGH for high-speed dubbing.
4 Press the PAUSE button of TAPE 1.
5 Press the RECORD button of TAPE 1, which also engages
the PLAY button.
6 Choose either side A(1) or side B(2) of TAPE 2 with the
DIRECTION switch.
7 Press the PLAY button of TAPE 2.
● The PAUSE button of TAPE 1 will be released automati-
cally and dubbing from TAPE 2 to TAPE 1 will begin (Syn-
chronous dubbing start).
Notes:
● Do not change the setting of the DUBBING SPEED switch
during dubbing.
● Do not connect anything to the MIX MIC socket.
PLAY PLAYPAUSE
DIRECTION
RECORD
DUBBING SPEED
FUNCTION
TAPE 1 TAPE 2
■ Erasing recorded tapes
1 Load the tape to be erased into the TAPE 1 cassette com-
partment.
2 Set the FUNCTION switch to TAPE.
3 Set the DUBBING SPEED switch to HIGH or NORMAL.
● Check to ensure that TAPE 2 is out of operation.
4 Press the RECORD button of TAPE 1 to begin erasing.
Note:
● Do not connect anything to the MIX MIC socket.