ENGLISH MODEL GX-BT3 WIRELESS BLUETOOTH® SPEAKER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MUTE BASS ON/ ECO MODE STAND-BY TREBLE PAIRING VOL X-BASS BLUETOOTH AUDIO IN DIMMER RRMCGA343AWSA soft barcodesoft.com ●● This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher.
Special Notes ●● Hereby, SHARP Electronics declares that this SHARP Wireless Bluetooth Speaker System GX-BT3 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/GX-BT3.pdf WARNINGS ●● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
Controls and indicators 1 2 3 4 5 GX-BT3 6 Front panel 1. Audio in socket 2. On/Stand-by Button 3. X-Bass Button 4. Function Button 5. Pairing Button 6. Volume Down Button 7. Volume Up Button 8. LED light 9. Remote Sensor 10.
Controls and indicators (continued) Remote control 1 MUTE 2 3 4 5 6 ON/ ECO MODE STAND-BY 13 14 BASS TREBLE 15 X-BASS PAIRING 7 8 9 10 11 VOL 16 BLUETOOTH AUDIO IN 17 DIMMER 12 1. Eco Mode Button 2. Mute Button 3. Treble + Button 4. Bass + Button 5. Treble - Button 6. Bass- Button 7. Pairing Button 8. Audio In Button 9. Bluetooth Button 10. Play/Pause Button 11. Skip down Button 12. Dimmer Button 13. On/Stand-by Button 14. Volume Up Button 15. Volume Down Button 16.
Power Source Wall socket AC 100 - 240 V ~ 50/60 Hz ECO MODE MUTE BASS ON/ ECO MODE STAND-BY VOL TREBLE PAIRING X-BASS BLUETOOTH AUDIO IN USB DIMMER RRMCGA342AWSA AC power connection Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. Bluetooth standby mode T o cancel the Bluetooth standby mode, press the ECO MODE button (remote control) during Bluetooth standby mode. The unit will enter the low power consumption mode.
General control Auto power off function ON/ STAND-BY MUTE BASS The unit will enter the standby mode if: Bluetooth: ●● No connection for 60 seconds. ●● In the pause or stop mode for 20 minutes Audio In: No detection of input signal after 20 minutes ON/ ECO MODE STAND-BY VOL TREBLE PAIRING VOL X-BASS X-Bass control BLUETOOTH AUDIO IN X-BASS GX-BT3 To turn on/off the X-Bass, press the X-BASS button repeatedly until the desired X-Bass mode appears.
Bluetooth one touch connection via NFC Unlike other wireless technology, NFC requires no discovery or pairing. Simply tap the source device to the NFC tag to instantly enjoy seamless connectivity between your smart device and the audio system. ■■ About NFC technology Near Field Communication (NFC) is a set of standards for devices (smartphones/tablets) to establish radio communication with each other by touching/tapping them together or bringing them into close proximity.
Listening to Bluetooth enabled devices ■■ Pairing with other Bluetooth source devices ■■ Bluetooth Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 metres (30 feet) without the hassle of having to use cables to connect these devices. This unit supports the following: Communication System: Bluetooth Specification version 2.
Listening to Bluetooth enabled devices (continued) ■■ Listening to the sound Check that: ●● The source device Bluetooth functionality is ON. ●● Pairing of this unit and the source device is completed. ●● Unit is in connected mode (pairing indicator (BLUE) lights up.) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the BLUETOOTH button on the remote control or FUNCTION button repeatedly on the main unit to select Bluetooth function.
Connecting other equipment 1 Use a connection lead to plug in the portable audio player, etc. to the AUDIO IN socket. When using video equipment, plug in the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the AUDIO IN button on the remote control or FUNCTION button repeatedly on the main unit to select AUDIO IN function. 4 Play the connected equipment.
Troubleshooting chart (continued) Specifications ■■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
For Australia and New Zealand customers SHARP FORLOCATION LOCATIONENQUIRIES ENQUIRIESWITHIN WITHIN FOR AUSTRALIA AUSTRALIA REGARDINGYOUR YOURLOCAL LOCAL REGARDING SHARPAPPROVED APPROVEDSERVICE SERVICECENTRE CENTRE SHARP VISITOUR OURWEBSITE WEBSITEAT AT VISIT www.sharp.net.au www.sharp.net.
For Australia and New Zealand customers WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
For U.K. and Ireland customers NOTES FOR USERS IN THE U.K. AND IRELAND The mains lead of this product is tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always re t the fuse cover after replacing the fuse. Never use the plug without the fuse cover tted.
For U.K. and Ireland customers Information on Proper Disposal A.Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
For U.K. and Ireland customers TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below:1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. 2.
