Specifications
Table Of Contents
- For Using Your Camera Safely
- Care to be Taken During Handling
- Contents
- Composition of the Operating Manual
- 1 Before Using Your Camera
- 2 Getting Started
- 3 Basic Operations
- 4 Shooting Functions
- 5 Shooting Settings
- 6 Playback Functions and Image Editing
- 7 Changing Additional Settings
- 8 Connecting to a Computer
- 9 Using the Flash
- 10 Appendix
49
Getting Started
2
Turning the Camera On and Off
1
Turn the main switch to [ON].
The camera turns on, and the startup
screen appears.
Set the main switch to the position [OFF]
to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations
within a set period of time (Auto Power Off). To reactivate the camera, turn it
on again or perform any of the following operations.
- Press the shutter release button halfway.
-Press the 3 button or M button.
• [Auto Power Off] is set to [1min.] by default. You can change the setting in
[Auto Power Off] of the [R Set-up 2] menu. (p.194)
• To turn the camera on in playback mode, turn the main switch to [ON] while
holding down the N button.
• If you do not want to display the startup screen, you can change the setting
in [LCD Display] of the [R Set-up 1] menu. (p.192)