Service manual

FO-DC600U

2 – 9

3. How to make soft switch setting

To enter the soft switch mode, make the following key entries in sequence.

Press

9 8 7 START ASTART

Press MENU key.

Press key.

Bit1 - 8 are set.

Soft SW02 - 99 are set.

S W 01 = 1 0 0 0 0 0 0 0

S W 02 = 0 0 0 0 0 0 0 0

S W 99 = 0 0 0 0 0 0 0 0

Press key during setting.

To finish the settings halfway between

SW01 and SW99, press the STOP key.

In this case, the setting being done to

the SW No. on display will be nullified

while settings done to the preceding

SW No. remain in effect.

The soft switch mode is terminated.

S W 01 = 0 0 0 0 0 0 0 0

START

• SW1 to SW22 : For Line-1

• SW23 to SW44 : For Line-2