User Manual
Optional Answering System Settings
59
3. Answering
Machine
1
Press once and once.
2
Press once and 3 times.
3
Press .
4
Press to turn on automatic fax
reception, or to turn it off.
5
Press to return to the date and time display.
FUNCTION
1
2
STOP
ON A.M. FAILURE
Display:
A.M. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
OGM ONLY MODE
Fax reception on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
A.M. FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
♦ Automatic fax reception NO: The machine will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see
Remote Operations
on page 64).
♦ Automatic fax reception YES: The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see
Remote Operations
on page 64).
Automatic fax reception is set to NO at the factory before shipping. If you want
to set it to YES, press the panel keys as follows:
all.bookPage59Tuesday,May20,200311:09AM