Specifications

Sending a Fax: Auto Dialling
24
Storing a redial number in the
phonebook
1 Press , and then or
as needed until the number
you wish to store appears.
2 Press .
3 Enter a name for the number (see
page 8).
4 Press .
5 The number will appear. Press
again to store it.
Automatic redialling
If you use the phonebook or a Rapid
Key to send a fax and the line is busy,
the machine will automatically make
three redial attempts at intervals of five
minutes.
During this time, [RECALLING] will
appear in the display, followed by the
attempt number. You will not be able to
dial any other locations while the
message appears.
♦ To clear the message and stop
automatic redialling, press .
♦ Under certain conditions, automatic
redialling may stop before three
redialling attempts are made.
F
F
F
F
F
Dial Tone Check
This setting determines whether or not
the machine checks for the presence of
a dial on the line before automatic
dialing.
Initial setting: NO
Note: If you set this setting to YES and
find that the machine is unable to dial,
change the setting to NO.
1 Press , , , and .
2 Press (YES) to have the
machine check for a dial tone.
Press (NO) to have the
machine not check for a dial tone.
3 Press to exit.
F