Specifications

Caller ID
95
7. Special
Functions
1
Press the keys shown at right.
PRIORITY CALL # will appear in
the display.
3
FUNCTION
2
Press 1 to enter a number, or 2 to clear
a number. (If you pressed 2, go to
Step 4.)
3
Enter the phone number, including the
area code, by pressing the number
keys (max. of 20 digits).
1 2
or
32 2 4 5 6
7
4
Press the START/MEMORY key
and then the STOP key.
(Example)
START/MEMORY
STOP
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in Blocking Reception of Unwanted Faxes in this chapter to
prevent voice calls as well as fax receptions (the Anti Junk Fax function
can normally only prevent faxes).
In this case when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will terminate
the call as soon as it receives the calling phone number from the caller ID
service. The caller will hear a 3 second high pitch tone to signal the calls
termination. In Australia the call will not break off until the caller has
hung up.
To use this function, set Option Setting 11 to YES as described in Chapter
8, Option Settings, and then enter the number in the Anti Junk Number
List as explained in Blocking Reception of Unwanted Faxes in this
chapter.
Note: This function cannot be used if you are using Distinctive Ring.