Specifications

Option Settings
118
Setting 8: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing in TEL/FAX reception mode.
Press 1 for 15 seconds, 2 for 30 seconds, 3 for 60 seconds, or 4 for 120
seconds.
♦ Initial setting: 1
DISTINCTIVE RING
STOP
Enter a number
from 1 to 4
Note for New Zealand: Telecom regulations do not permit the 60-second
and 120-second settings to be used.
PSEUDO RING DUR.
4
until
display
shows:
FUNCTION
Press
Setting 10: FAX SIGNAL RECEIVE
Your fax will automatically begin reception if you hear a high-pitched fax
tone after answering a call. If you use a computer fax modem on the same
line, you must turn this function off in order to prevent your fax from
mistakenly attempting to receive documents sent from the computer fax
modem. Press 1 to turn the function on, or 2 to turn it off.
♦ Initial setting: 1
JUNK # CHECK
or
1 2
YES NO
STOP
FAX SIGNAL RX
4
until
display
shows:
FUNCTION
Press
Setting 9: DISTINCTIVE RING
If you subscribe to a distinctive ring service from your telephone
company, press 1 to have your fax signal voice calls and fax
transmissions by different ring patterns. Press 2 to turn the function off.
(This setting is described in more detail in Distinctive Ring in Chapter 7.)
♦ Initial setting: 2
FAX SIGNAL RX
or
1 2
YES NO
STOP
DISTINCTIVE RING
4
until
display
shows:
FUNCTION
Press