Service manual

1 – 7
FO-77U
UX-66U
5. Clearing a jammed document
If the original document doesn’t feed properly during transmission or
copying, or DOCUMENT JAMMED appears in the display, first try press-
ing the START key. If the document doesn’t feed out, open the operation
panel and remove it.
Important:
Do not try to remove a document without first releasing it as explained
below.
This may damage the feeder mechanism.
Grasp the finger hold and pull up to open the operation panel.
Flip up the green levers on each side of the white roller.
Remove the document.
Flip down the green levers on each side of the white roller.
Close the operation panel, making sure it clicks into place.
• Press down on both front corners of the panel to make sure it
clicks into place.