Service manual

1 – 5

FO-77U

UX-66U

Insert one end of the line cord into the jack on the back of the ma-

chine marked TEL. LINE. Insert the other end into a standard (RJ11C)

single-line wall telephone jack.

Flip up the front paper guide.

Remove the tape and packing paper from the cutter unit.

TEL.

LINE

Note: The fax machine is set for touch-tone dialing. If you are on a

pulse dial (rotary) line, you must set the fax machine for pulse dialing.

Press the keys on the operation panel as follows:

3. Press the STOP key to return to the date

and time display.

3. Removing the packing paper

Grasp the finger hold and pull up to open the operation panel.

DIAL MODE

FUNCTION

2. Press 1 to select tone (touch-tone)

dialing, or 2 to select pulse (rotary)

dialing.

TONE

PULSE

STOP

1. Press these keys:

The display will show:

Flip down the front paper guide and then close the operation panel.