User Manual
Setting 9: DIAL MODE
This sets the mode of dialling. Press 1 if you are on a tone dial line, or 2 if you
are on a pulse dial line.
• Initial setting: 1
FUNCTION
4
Press
until
display
shows:
DIAL MODE
STOP
FUNCTION
4
STOP
2
1
TONE PULSE
or
PSEUDO RING DUR.
Setting 10: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when the reception mode is set to
TEL/FAX. Enter a number from 1 to 4 as follows:
Eire: Settings 3 and 4 are not available.
1 (15 SEC.):
15 seconds
2 (30 SEC.):
30 seconds
3 (60 SEC.):
60 seconds
4 (120 SEC.):
120 seconds
• Initial setting: 1
Press
until
display
shows:
PSEUDO RING DUR.
Enter a number
from 1 to 4
QUIET DETECT TM.
Setting 11: QUIET DETECT TIME
When an answering machine is connected to the fax, the fax will take over the
line and begin reception if it detects a certain duration of silence after the
answering machine answers a call. This sets the duration of silence (in
seconds). Enter a number from 01 to 10, or enter 00 to turn off the function.
• Initial setting: 04
FUNCTION
4
STOP
Press
until
display
shows:
QUIET DETECT TM.
Enter a number
from 00 to 10
QUIET START TIME
Option Settings
90