Service manual

1 – 9
FO-4700U
FO-47UC
Loading paper in the paper cassette (Option : FO-47UC)
1) Grasp the hand-hold on the cassette and pull out the cassette until
it stops.
2) Push the pressure plate down until it locks into position.
3) Place a stack of paper in the cassette, print side up.
• Make sure the stack of paper is not higher than the two tabs
on the green paper guide and the metal tab. If it is, remove
some of the paper.
4) Push the cassette back into the machine, making sure it clicks into
place.
If the original document doesn’t feed properly during transmission or
copying, or REMOVE ORIGINAL(S) appears in the display, first try
pressing the START key. If the document doesn’t feed out, open the
operation panel and remove it.
Important! Do not try to remove a document without opening the
operation panel. This may damage the feeder mechanism.
Open the operation panel.
• Squeeze the release marked PANEL RELEASE and pull up.
Remove the document.
Close the operation panel, making sure it clicks into place.
5. Clearing a jammed document