Specifications

O S
Setting 8: AUTO FAX/PHONE CHANGEOVER
Press “1” (YES) to have your fax detect whether incoming calls are voice calls or
fax transmissions In automatic reception mode. Press “2” (NO) to turn the function
off.
. Factory setting: “2”
Setting 9: PSEUDO RINGING DURATION
, This sets the duration of pseudo ringing when Automatic Fax/PhoneChangeoveris
turned on. Enter a number from
“1to “2”as follows:
“1(15 SEC.):
15 seconds
“2” (30 SEC.):
30 seconds
● Factory setting: “1”
Setting 10: PAPERSAVE
This reduces the vertical length of documents received, allowing you to save paper.
Enter a number from “1” to “3” as follows (“S” will appear highlighted in the displav
while Paper Save is turned on):
“l” (MODE 1): Reduce only the white spaces between lines.
“2” (MODE 2):
Reducethe entire document by 50°0(only when
standard resolution is used).
“3” (NO): No Paper Save.
. Factory setting: “3”
Setting 11: TIME SAVE
This reduces the vertical length of documents transmitted by 20°0,saving line time
and thereby allowing you to reduce telephone costs. Press “1”toturn the function
on, or “2” to turn it off.(”T” will appear highlighted in the display while Time Save is
turned on):
. Factory setting: “2”
Setting 12: DISTINCTIVE RINGING
This sets the ring pattern to which your fax will answer if you subscribe to a
distinctive ringingservice. Enter a number from “l” to 2“ to select a pattern. See
“Distinctive Ringing” in Chapter 2 for more details.
● Factory setting: “2”
O SE~lNGS
8-3