Specifications

S N F A D
Automatic dialling ISa quick and convenient way of dialling which ISperformed by
either pressing a Rapid Key (Rapid Key Dialling). or pressing the
S DIALkey
and entering a 2-digit number (Speed Dialling). It can be used for both fax transmis-
sions and voice calls.
To use automatic dialling. you must first store the full number in your fax and assign
a 2-digit Speed Dial number to it. You can also enter a name which appears in the
display when the number is dialled. Up to 50 numbers can be stored.
Speed Dial numbers from “01” to “20” can be used for both Rapid Key Dlalllng
and Speed Dialling; Speed Dial numbers from “21” to “50” can only be used for
Speed Dialling.
To allow easy identification of the Rapid Keys, attach each strip of Rapid Key
labels above the appropriate row of Rapid Keys. The arrangement of the keys IS
shown in “Operation Panel” at the beginning of this chapter.
C
Youmay need to add a pause between cetiain digits in the number to allow time
for connection. For example, if you are on a
P telephone system that requires
an access number to be dialled (such as “9”) to access an outside line. you will
need to enter a pause between the access number and the telephone/fax
number of the other party. Pauses are entered by pressing the REDIAL key (2
secondsper pause). If necessary, several pauses can be entered in a row.
To enter letters for names or correct a mistake. see “Entenngletters for names”
in this chapter.
1
Press the keys shown at left. “FAXTEL.
‘“’o”’ m m
# MODE” will appear Inthe display.
2
m
Press “ to select SET.
2-16
INITIAL SETTINGS