Specifications

ANSWERING MACHINE SET-UP
A 3-digit passcodecan be programmed for each of the boxes. If this is done, the
passcode must be entered before messages in the box can be listened to or
erased. Program a new passcode or clear a previously programmed passcodeby
pressing the panel keys as shown below.
+ The numbers “1”,
“2”, and “3” cannot be selected for the first digit of the
passcode.
1
FUNCTION
m
Press the keys shown at Iefi. “A.M. SET-
0
TINGS” will appear in the display.
2
0
*
Press the keys shown at left. “BOX
PASSCODE” will appear in the display.
3
@
m
Press “ to enter a passcode,or “2” to
or
clear a previously programmed
passcode.
4
Enter the number of the box for which
@
you want to program or clear a
passcode by pressing the appropriate
numeric key.
(Example)
If you are clearing a passcode. go to
Step 6.
5
Enter a 3-digit passcodeby pressing the
number keys.
(Example)
6
Press the S key and
then the STOP key.
N ensure confidentiali~, passcodes cannot be checked. If you have forgot-
ten a passcode, clear it and program a new one.
2-12
INITIAL SETTINGS