Specifications

L T F P

Your fax prints by a process called thermal printing. The print head applies heat to

special paper which ISchemically treated to change colour when heated to a cefialn

level. and this creates the printed text or Image.

Followthe steps below to load the sample roll of fax paper provided.

Grasp the finger hold on the right side of

the paper compartmentcover, and pull

up to open it.

‘~>.,~

,-.

Remove the packing paper from the pa-

‘-: ~~’y’

----

>,/

per compartment.

/–.

-, -

“*

[t - { ‘

‘..

‘B.

. Caution! If you are replaclng the pa-

‘==—... - .

-..

J3 ‘J:

per, do not touch the metal strip in the

““--, -,- -

compartment. It may be hot If a docu-

ment has just been printed.

Unwrap the roll of fax paper and insert it

In the compartment.

I The roll must be placed so

that the leading edge of the paper

feeds from over the top of the roll.

(The paper is only coated on one side

for printing. If the roll is placed upside

down, the paperwill come out blank af-

ter printing.)

Pass the leading edge of the paper

through the slit betweenthe metal paper

guide and the protruding ribs, and pull It

out from the other side of the paper com-

partment cover. Removeany SiaCK.

-.,

‘ /

INSTALLATION

1-5