Service manual

FO-4400U
FO-CS1
[4] Transmittable documents
1. Document Sizes
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blueprint)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
Normal size
width 5.8" – 10.1" (148 – 256 mm)
length 5.0" – 14.3" (128 – 364 mm)
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. 50 sheets (14 lbs - 20 lbs)
Special size: single sheet only (manual feed)
NOTES: • If you need to send or copy more 50 pages, place the ad-
ditional pages and carefully in the feeder just before the
last page is scanned. Do not try to force them in, as this
may cause double-feeding or jamming.
• If your document consists of several large or thick pages
which must be loaded one at a time, insert each page into
the feeder as the previous page is being scanned. Insert
gently to prevent doublefeeding.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
• Readable width
8.2" (208 mm) max.
• Readable length
This is the length of the document sent minus 0.16" (4 mm) from the top
and bottom edges.
Readable width
0.16"(4mm)
0.16"
(
4mm
)
Readable length
(Min.)
(Max.)
(Max.)
128 mm
364 mm
483 mm
148 mm 256 mm
[
Normal size
]
279 mm
[
S
p
ecial size
]
Product specifications
Indication Lower Limit Upper Limit
Weight Japanese indication 45kg paper 70kg paper
indication Size 4 × 6
Metric system 52g/m
2
80g/m
2
indication
American indication 14 LB 20 LB
LB system indication
Thickness Metric system 0.06mm 0.1mm
indication indication
Inch system indication 0.0024 " 0.0035 "
Document Document size (148mm × 128mm) ~
size Range W letter (279mm × 483mm)
A4 (210mm × 297mm)
Letter (216mm × 279mm)
Number of Document size B6 ~ Letter/A4 size 50 sheets
ADF sheets Weight B4 size/Legal 20 sheets
W letter size 1 sheet
90 kg (104g/m
2
) or more
135 kg (157g/m
2
) or less1 sheet
Paper Kind Paper of fine quality/bond paper/
quality Kent paper
1 – 3