Specifications

Sending a Fax by Automatic Dialling
59
2. Sending
Documents
Direct Keypad Dialling
You can also enter a full number with the number keys and then press
the
START
key to begin dialling. You can use this method to dial a
full number when you don’t need to speak to the other party before
faxing.
1
Load the document(s). (Note: If
desired, you can load the document
after dialling in Step 2, below.)
•
SEND READY will appear in the
display.
•
Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric
keys.
•
If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL
key (two seconds per
pause). The pause will appear as a
hyphen. Several pauses can be
entered in a row.
3
Check the display. If the number of
the receiving machine shown is
correct, press the
START
key.
•
If it is not correct, press the
STOP
key to backspace and clear one
digit at a time, and then re-enter the
correct digit(s).
(Example)
4
6
7
5
32 2
START
RESOLUTION
all-fo2950hk.book Page 59 Wednesday, August 9, 2000 11:13 AM