Specifications

Messages and Signals
133
10. Trouble-
shooting
MEMORY IS FULL The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been received
to memory because printing is not possible (an
additional message will indicate the problem), resolve
the problem so that printing can continue (see
Substitue Reception to Memory
in Chapter 3). If you
are attempting to transmit by automatic dialling, see
If
the memory becomes full
in Chapter 2.
MEMORY PRINTING The fax is preparing to or printing out a document
from memory.
NO DATA This appears if you attempt to search for an
automatic dialling number when none have been
stored.
NO # STORED You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn’t been programmed (a full
number hasn’t been assigned to it).
OFF HOOK This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the
STOP
key to clear the message.
ON HOOK DIAL The
SPEAKER
key has been pressed and the fax
machine is waiting for you to dial.
OUT OF PAPER You are out of printing paper (or the paper release
lever is open). Load paper as explained in
Loading
Printing Paper
in Chapter 1.
PAPER JAMMED The printing paper is jammed. See the following
section,
Clearing Paper Jams
.
REPLACE TONER The toner cartridge must be replaced.
SEARCH DIAL The
HOLD/SEARCH
key has been pressed. (See
Searching for an auto-dial number
in
Sending a Fax
by Automatic Dialling
in Chapter 2.)
all-fo2950hk.book Page 133 Wednesday, August 9, 2000 11:13 AM