Specifications

Messages and Signals
132
Messages and Signals
Display messages
CAN’T PRINT DATA A fax has been received to memory because printing
is not possible. This message will alternate with a
message that indicates the problem. The fax will print
out automatically when the problem is resolved.
CHECK PAPER SIZE An incorrect size of paper has been loaded in the
paper tray. Remove the paper and load A4-size
paper.
CHECK PC This appears if you press the
E-MAIL
key and your
computer is not turned on or is not correctly
connected to the fax machine.
COVER OPEN The print compartment cover is open. Press down
firmly on both sides of the print compartment cover to
close it.
DOCUMENT JAMMED The original document is jammed. See the following
section,
Clearing Paper Jams
.
FUNCTION MODE The
FUNCTION
key has been pressed.
GRP. SPACE FULL This appears if you attempt to program a Group Key
when all Group Keys have already been
programmed.
HOLD The
HOLD/SEARCH
key has been pressed to put the
other party on hold during a phone conversation.
Press the
HOLD/SEARCH
again to take the other
party off hold.
LINE ERROR Transmission or reception was not successful. Press
the
STOP
key to clear the message and then try
again. If the error persists, see
Line Error
in
Problems
and Solutions
in this chapter.
all-fo2950hk.book Page 132 Wednesday, August 9, 2000 11:13 AM