Service manual

1 – 3
UX-4000MU
FO-2950MU/C
[3] Transmittable documents
1. Document Sizes
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blueprint)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
Normal size
width 148 – 210 mm
length 128 – 297 mm
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents before
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. 20 sheets
Special size: single sheet only (manual feed)
NOTES: • If you need to send or copy more 20 pages, place the ad-
ditional pages and carefully in the feeder just before the
last page is scanned. Do not try to force them in, as this
may cause double-feeding or jamming.
• If your document consists of several large or thick pages
which must be loaded one at a time, insert each page into
the feeder as the previous page is being scanned. Insert
gently to prevent doublefeeding.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
• Readable width
208 mm max.
• Readable length
This is the length of the document sent minus 0.2” (5 mm) from the top
and bottom edges.
Readable width
0.16" (4 mm) 0.16" (4 mm)
0.2" (5mm)
0.2"
(
5mm
)
Readable length
(Min.)
(Max.)
letter
(Max.)
128 mm
279 mm
1.0 m
148 mm 216 mm
[
Normal size
]
216 mm
[
Special size
]
Product specifications
Indication Lower Limit Upper Limit
Weight Metric system 52g/m
2
80g/m
2
indication indication
Thickness Metric system 0.06mm 0.1mm
indication indication
Document Document size Minimum (148mm × 128mm)
size Range A4 (210mm × 297mm)
Letter (216mm × 279mm)
Legal (216mm × 356mm)
Number of Document size Minimum ~ Letter/A4 size 20sheets
ADF sheets Weight Legal 1 sheet
More than 90 kg
Below 135kg 1 sheet
Paper Kind Paper of fine quality/bond paper/
quality Kent paper