Service manual

UX424WCMUlCMC
FQ-215ocMulcMc
4. How to make soft switch setting
To enter the soft switch mode, make the following key entries in
sequence.
DATA No. 12345678
1 SFT SW-1 =,,.o,. 0 0 0 0 0 0 01 1 001 J
Press [FUNCTIONI key.
.SFT SW-1 =:+I 0 0 00 0
1 00) ~
Press I#1 key.
SFT SW-1 =I:@ 0 00 0
1 Il
Press q key.
SFT SW-1 = ,,I 0 0 00 0 00)
: Bit1 - 8 are set.
1 0 /@] - SFT SW-l = 1 0 0 0 0 0
Press ISTART] key during setting.
1 SFT SW-l = .;a 0 0 0 0 0 0 0
,I
2 Soft SW-l- SW-35 are set.
1 SFT SW-35= 0 0 0 0 0 0 O,,;ol
~ l TO finish the settings halfway between
SW-1 and SW-35, press the STOP
key. In this case, the setting being done
to the SW No. on display will be nullifiec
while settings done to the preceding
SW Nos. remain in effect.
l When the COPY key is pressed, the
contents of soft switches are printed.
1 The soft switch mode is terminated. 1
2-5