Service manual

ux-22OoCMu/Ch,rc
lQ21m/cMc
1. Press: FUNCTION
II@@
Display shows:
FAX/TEL # MODE
2.
3.
4.
5.
6.
a
Press 1 to store a number or 2 to clear a
number.
Enter a P-digit Speed Dial number (from 01 to
36 for Rapid Key Dialing, or 39 to 99 for Speed
Dialing). (If you are clearing a number, go to
Step 7.)
Enter the full telephone/fax number.
Press: SORT
\$/
Enter the name of the location by pressing
number keys as shown below (max. of 20
characters).
To enter two letters in succession that require
the same key, press the SPEAKER key after
entering the first letter.
@-@w@ 3 -E;y highlighted
4 Upper/lower case
._...
@ @@ ’
- Moves cursor to the
/
/
right.
I
,
Press either key one or more times
to select and enter a symbol.
START
STOP
7. Press:
m /Xl
Place the document
(up to 20 pages) face
down in the document
feeder.
Normal Dialing
SPEAKER
1.
Lift the handset or press
0
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start key).
4. Press:
START
m
Rapid Key Dialing
Press the appropriate Rapid Key (if the Rapid Key
is from 20 to 36, press the SHIFT key first).
Transmission will begin automatically.
Speed Dialing
1. Press: s&tD
0
2. Enter 2-digit Speed Dial number.
3. Press:
i”“r
@
Press:
REt%Em
JAN05 lo:41 AUTO
1 t
JAN05 lo:41 MANU
AUTO mode: The fax automatically answers on
four rings and receives the incoming document.
MANU mode:
%b
Q/
_ Fax
/
tone - G?
._
- RECEIVING
Selecting the receiving unit
1. Press: in, @
2.
Press 1 for fax reception to the Sharp MFP, or
2 for fax reception to your computer.
Note: For your computer to receive faxes
automatically, the Color MFP reception mode must
be set to AUTO.
l-10