Specifications

[9] DISASSEMBLY, ASSEMBLY, MAINTENANCE
1. List
• OIL/GRE (Lubricate, grease up) CLN (Clean) ADJ (Adjust) REP (Replace, install)
CHP (Change position); (Clean, replace, lubricate, grease up according to necessity.) ASS (Assemble, disassemble)
Section Unit Part JOB
CODE
After-work
NOTE
S No. Part name Ua No. Unit name Ub No. Unit name P No. Part name JOB No.
S 001 External view
(Cabinet/Cover)
P 001 Rear cabinet ASS
P 002 Front upper cabinet ASS
P 003 Right cabinet ASS
P 004 Left cabinet ASS
CLN
P 005 Front right lower cabinet ASS
P 006 Front left lower cabinet ASS
P 007 Document table glass ASS
CLN
P 008 Bottom base plate ASS
P 009 Paper reception tray ASS
S 002 Operation Ua 001 Operation unit ASS
P 001 Hinge ASS
P 002 Operation control PWB ASS
P 003 Key top ASS
S 003 Paper feed, paper
transport
P 001 Paper width detector ASS
P 002 Paper set lever ASS
P 003 Paper pressure plate ASS
P 004 Paper feed roller clutch spring ASS
GRE
P 005 Paper feed roller ASS
CLN
P 006 Paper feed clutch sleeve A ASS
GRE
P 007 Paper feed clutch sleeve B ASS
GRE
P 008 Paper feed clutch lever ASS
P 009 Paper separator ASS
CLN
S 004 Scanner (reading) Ua 001 Scanner (reading)
unit
ASS ADJ M3
P 001 Scanner home position sensor ASS
P 002 Scanner (copy) lamp drive PWB ASS ADJ M10 Adjustment
is required
when replace
P 003 Scanner motor ASS
P 004 Scanner motor gear GRE
P 005 CCD unit (CCD/lens) ASS ADJ M4
CLN
P 006 Scanner rail GRE
P 007 Scanner shaft ASS
GRE
P 008 Scanner drive wire ASS ADJ M2/M3
Ub 001 Scanner unit
A
ASS ADJ M3
P 001 Scanner (copy) lamp ASS ADJ M10 Adjustment
is required
when replace
CLN
P 002 No. 1 mirror ASS
CLN
P 003 Scanner lamp light quantity
sensor
CLN
Ub 002 Scanner unit
B
ASS
P 001 No. 2 mirror ASS
CLN
P 002 No. 3 mirror ASS
CLN
FO-3800M
9 – 1