Specifications

SW
No.
Bit
No.
ITEM Soft SW setting and function Factory Setting
28 1
2
3
4
Silent detection time Used to set the silent detection time in the answering and
recording mode.
The set range is OFF and 1 to 10sec.
Time = 8 × Bit1 + 4 × Bit2 + 2 × Bit3 + 1 × Bit4 sec
Effective : 0(= OFF), 1 –10
0 0 0 0 (OFF)
0 0 0 0 (1 sec)
| |
1 0 1 0 (10 sec)
0
1
0
1
5 Answering and recording mode
auto reception select
Used to set whether FAX reception is started or not after 6
call rings if the answering function does not work for some
reasons in the answering and recording mode.
0
6 Annoying FAX prevention function Used to set ON/OFF of the annoying FAX prevention
function.
0
7 Polling function Used to set whether one-touch key “20” is used as the
polling key or not.
0
8 Page sequence reverse
transmission
Used to set whether the page sequence scanned by the
SPF is reversed for transmission or not.
1
29 1
2
Reserved 0
0
3 Reserved 0
4
5
Reserved 0
0
6
7
Broadcast list print Used to set whether broadcast transmission report is
printed after completion of broadcast transmission or not.
0
0
8 Index print Used to set whether marking is made to the lead edge of
paper or not to identify the job when printing the received
data.
1
30 1
2
3
Language (USA only) Used to select the language displayed on the LCD and the
report. The correspondence between language N and the
actual language differs depending on the destination.
0
0
0
4 Reserved 0
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
1 : ON 0 : OFF
1 : ON 0 : OFF
1 : ON 0 : OFF
1 : ON 0 : OFF
Bit No. Always
When error
is occured/
Timer
transmission
Never
6001
701∗
1 : ON 0 : OFF
Bit
No.
Lan-
guage 1
(English)
Lan-
guage 2
(French)
Lan-
guage 3
(Spanish)
Lan-
guage 4
Reserved
10 0 0 01111
20 0 1 10011
30 1 0 10101
FO-3800M
8 – 29