Specifications
Sending a Fax by Automatic dialling
47
2. Sending
Faxes
1
If you are sending a fax, load the
document(s).
• If desired, press to set
the resolution and/or contrast.
2
Press once. <REDIAL> appears in the display, followed by the
last number dialled. Make sure the number that appears is the number
you wish to dial.
3
If you are sending a fax, press . Dialling begins.
If you are making a phone call, lift the handset. Dialling begins.
RESOLUTION/
RECEPTION MODE
REDIAL
Z
START/
MEMORY
Redial
You can automatically redial the last number dialled on the fax machine. This
procedure can be used to send a fax or make a phone call.
Automatic redialling
If you use automatic dialling (including Direct Keypad dialling) to send a fax
and the line is busy, the fax machine will automatically redial the number. The
fax machine will make 2 redial attempts at intervals of 5 minutes. During this
time, RECALLING will appear in the display, followed by a two-digit number
assigned to the fax job. You will not be able to dial any other locations while
the message appears.
♦ You can press to clear the message and stop automatic redialling.
♦ Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before 2 redialling attempts are
made.
STOP
READY TO SEND
all.bookPage47Thursday,March6,20033:57PM