Specifications

Loading the Thermal Paper
17
1. Installation
4
Unwrap the roll of thermal paper and
insert the paper shaft.
3
Place the paper roll shims on each
side of the paper compartment.
•
The ribbed side of the shims should
face in (toward each other).
YES
NO!
♦
Important:
The roll must be placed so that the leading edge of the
paper unrolls as shown. (The paper is only coated on one side for
printing. If the roll is placed backwards, the paper will come out
blank after printing.)
5
Place the roll of thermal paper in the
compartment, making sure the ends
of the rod fit into the notches on each
side of the compartment.
all-fo50hk.book Page 17 Thursday, August 26, 1999 4:15 PM