User's Manual

8
www.ninjafryingsystem . com
TIME
START/STOP
TEMP
+
ATTACHING THE BREAK-AWAY SAFETY
POWER CORD
1 Plug the break-away safety power cord into
the back of the deep fryer. Make sure the top
of the plug reads ‘THIS SIDE UP’. You will feel
a magnetic pull if installed correctly. (Fig. 5)
WARNING: The break-away safety power
cord is intended to prevent the tipping of the
appliance and hazardous spillage of hot oil.
It is NOT intended to disconnect the fryer
during normal use.
WARNING: DO NOT attempt to defeat the
magnetic cord connection by attempting to
permanently attach the power cord to the
deep fryer.
WARNING: Use only the break-away safety
power cord provided with the deep fryer. Use
of any other magnetic cord could cause fire,
electric shock or injury.
WARNING: DO NOT come in contact with
the magnetic connection on the break-away
safety power cord while it is plugged into the
electrical wall outlet. Injury can occur.
FILLING THE OIL RESERVOIR
It is recommended to use oils such as; vegetable,
canola or peanut oil. Oils such as olive oil or extra
virgin olive oil should not be used and are not
ideal for deep frying.
1 Pour cooking oil into the reservoir until the
oil level is at the “FILL” line on the inside of
the oil reservoir. For best results, keep the
oil close to the “FILL” line. Ensure that the
heating element is installed prior to adding
oil. For best results, keep the oil close to the
“FILL” line. DO NOT exceed the “FILL” level.
(Fig. 4)
NOTE: DO NOT use olive oil, margarine, lard
or drippings. DO NOT mix old and new oil
together.
WARNING: Only turn on the unit if oil is
present in the oil reservoir and filled properly.
Fig. 4
Fig. 5
NOTE: Your deep fryer has been specifically
designed with your safety in mind and is
equipped with a unique break-away safety
power cord. This break-away safety power
cord is designed to detach from the fryer
in the event that the power cord or fryer is
inadvertently pulled or tugged.
F300_15_series_IB_ENG_121221_6.indd 8 12-12-21 2:11 PM