Specifications

You can print out a variety of lists showing settings and information entered in the fax.
You can also have the fax automatically print out a report on transactions after they
are made.
Each list and the report is described below.
I
Step
Press these keys: Comments
LISTING MODE will appear in the display.
2
@ 0’ @
Move through the lists by pressing “#” or “*”.
Stopwhen the desiredlistappears in the display.
START
3
2
; +
Print out the list.
This report shows information on up to 30 of the operations most recently performed.
The report is divided into two parts: the TRANSMISSIONS ACTIVITY REPORT, which
shows information on transmissions, and the RECEPTIONS ACTIVITY REPORT,
which shows information on receptions.
If Option Setting 3 is set to “1”, a report will be automatically printed out whenever
information on 30 operations has accumulated. (A report can still be printed out
manually at any time. )
All information is erased after a repofi is printed out. If automatic print-out is
disabled and print-out has not been performed manually for 30 operations, the
information on the oldest operation
will be overwritten each time a new operation is
performed.
Explanationof headings
SENDER/
RECEIVER
START
TX/RXTIME
PAGES
TYPE
PRINTING OUT REPORTS AND LISTS
The name or fax number of the other machine involved in the transaction. If that machine
does not have an ID function, the communication mode will appear (for example, “G3”).
The time at which transmission/reception started.
Total time taken for transmissionireception.
Number of pages transmitted/received.
CONF. TX - A confidential operation was performed.
RELAY TX - A relay operation was performed.
(T) - A timer operation was performed.
(M) - The
memorywas used.
8-1