Specifications

ENTERINGAND USINGPROGRAMS
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
+ Rapid Keys 17/Pi and 18/P2 can be used as Program Keys. However, a key
cannot be used if it is already being used for Rapid Key Dialling.
+ Only Rapid Keys, Speed Dial numbers, and Group Keys can be used to enter fax
numbers of receiving machines in Program Keys. Full numbers cannot be entered.
+
You can also include a timer setting in the program to have the operation performed
automatically at a selected time.
+ To clear a mistake, press the
STOP key.
To program an operation, first perform the following basic procedure. After you have
completed it, refer to the procedure for the specific operation you want to program.
+ Code numbers are used to set days of the week. Refer to the table below when
making time settings which include a specified day:
!
I
Day
SUN ~ MON TUE
WED
TI-IU
FRI SAT
Code
o i 1 , 2 3
4
5 6
I
!
~
Step
Press these keys:
, Comments
I
1
FUNCTION
t )
~ PROGRAM/GROUP will appear in the display.
1
I
PROG. ENTRY MODE will appear in the display.
I
I
13
; Select SET.
;171P1
I
4
I
0
I
Select a Program Key by pressingthe
(Example) ~ appropriateRapid Key,
ABC
DEF
~ @ m @
● ==
I Enter a
name for the program (max.of PO
@ I letier~)c(See “Entering
Lettersfor Names” ‘n
5 ~
!
~
Chapter2.)
(Example) \ Skipthis step if you don’t want to enter a name.
6-16
SPECIAL FUNCTIONS
“