Specifications

“
Take the fax machine out of the box carefully, and remove all packing material. Make
sure you have all the items listed below. If any are missing, contact your dealer.
Original document
‘up’”” -
Received document
support
Paper tray cover
o
Paper tray
*
.
H
/
/’
/“
Rapid key labels
Imaging cartridge
I
=Warran’card
&
minstal,ationr
Business products dealer
\
*
Operation manual
-.
.
Handset lead
‘andSet %
Drum cartridge
/@
WPS Driver
software
v
+
In addition to the above items, you should have an F080TP adaptor (fax line cord).
This is supplied separately by your dealer.
Precautionsbefore setting up
The printing unit in the fax generates a small amount of ozone during operation. The
amount is not large enough to be harmful; however, the fax should only be installed
in a well-ventilated room.
The fax must be installed on a level surface.
Keep the fax away from air conditioners, heaters, direct sunlight, and dust.
Provide easy access to the front, back, and sides of the fax. In particular, keep the
area in front of the fax clear, or the original document may jam as it comes out after
scanning.
Keep liquids away from the fax. Liquids spilled on the fax can damage the internal
circuitry.
If the fax is moved from a cold to a warm place, it is possible that condensation may
form on the reading glass, preventing proper scanning of documents for
transmission. To remove the condensation, turn on the power and wait
approximately 2 hours before using the fax.
INSTALLATION
1-1