Specifications

.
SENDING DOCUMENTS
Direct Keypad Dialling
If you do not need to talk with the other party before sending the fax, you can just dial;
it isn’t necessary to pick up the handset or press the SPEAKER key.
+ Direct Keypad Dialling is a form of automatic dialling, so if you need to insert a
pause between any digits of the number, press the REDIAL key. (For more
information on pauses, see “Storing Numbers for Automatic Dialling” in Chapter
2.)
1
~@.@
Enter the number of the receiving
GUI
machine by pressing the numeric
~--m
keys.
~ ~ ,3
k
()
.
2
START
n
Check the display. [f the number of
the receiving machine shown is
,“
@
correct, press the START key.
h
. If it is not correct, press the STOP key
to backspace and clear one digit at a
time, and then re-enter the correct
digit(s).
Rapid Key Dialling
If the number you want to dial has been stored as a Rapid Key number (see “Storing
Numbers for Automatic Dialling” in Chapter
2), you can dial it by pressing the
appropriate Rapid Key.
Press the appropriate Rapid Key.
01
02
03
04
05
●
●
The name of the receiving party will
appear in the display. If no name was
stored, the fax number will appear. (If
the name or number is incorrect, press
the STOP key.)
The document will be automatically
transmitted once the connection is
made.
BASIC OPERATIONS
4-7