Specifications

SENDING DOCUMENTS
Up to 20 pages can be placed in the feeder at one time. The pages will be
automatically fed into the fax starting from the page on the bottom.
If you need to send or copy more than 20 pages, place the additional pages gently
and carefully in the feeder just before the last page is scanned. Do not try to force
them in, as this may cause double-feeding or jamming.
If your document consists of several large or thick pages which must be loaded one
at a time, insert each page into the feeder as the previous page is being scanned.
Insert gently to prevent double-feeding.
1 Adjust the document guides to the
width of your document.
2
/
/
/
/,
/
Place the document face down and
,//
.
&(?”:?
push it gently into the document
‘/
feeder. The top edge of the document
should enter the fa-xfirst.
The feeder will draw the leading edge
of the document into the fax.
SEND/COPY READY will appear in the
display.
3
You can now either make resolution
and/or contrast settings as described
in the foiiowing section, or diai the
other party as described in the
section, “Diaiiing and transmission”.
important:
If you need to remove the document from the feeder before transmission or copying, first open
the operation panel by pulling the panel release on the right side of the fax forward, and then
remove the document. If you try to pull the document out without opening the operation panel,
you may damage the feeder mechanism.
4-2
BASIC OPERATIONS