Specifications

.
WINDOWS PRINTING SYSTEM
4. Windows 3.1 and Windows for VVorkgroups 3.1x:
Choose File from the menu bar in Program Manager, and then choose the Hun...
command.
Windows 95:
Click the Start button and then choose the Run icon.
5. Type a:\setup (or b:\setup, depending on which drive is your 3.5” floppy disk
drive) in the box, and then click the OK button..
6. Follow the instructions which appear in the installation window.
When “Which Installation Method?” appears, select Express or Custom as
described above.
. If you selected Custom, deselect ~heparts you don’t want to install by clicking
the corresponding boxes in the Custom Installation window.
. If you only want to install certain audio messages, click the Sound button in the
Custom Installation window.
To add a message to the Sounds to Install box,
click the message in the Sounds Available box, and then click the Add button.
To remove a message from the Sounds to Install box, click the message in
the Sounds to Install box, and then click the Remove buttion.
7. Remove all floppy disks from the disk drives, and then click the Restart Windows
button.
8. After Windows has restarted, the Print a Test Page window will appear. Click the
OK button to print out a test page.
. This window will not appear if the F-2700M is turned on after you have com-
pleted Steps 5 and 6.
9. When the Test Page verification window appears, Windows Printing System has
installed successfully. Click the Printed OK button.
. Keep the test page in a safe place. It contains useful information that could be
of assistance if a problem occurs with the printer.
. If the print quality is poor, or if
you have any other problem with printing, click
the Help button for on-screen information to help you solve the problem.
10. When the final window appears, click the OK button to complete the installation
process.
PRINTING SETUP
3-3